Michael,
Right click on the start icon in Windows and select device manager from the
drop down. In device manager select com ports. When you plug in the USB
cable a new com port should appear if you have the correct FTDI driver
loaded
Have you verified in the K3S menu that the com port is set to USB?
Terry
On Mon, Jan 9, 2023, 7:06 PM Michael Davis <michael@bassettconsulting.com>
wrote:
> Hello Scott,
>
> The problem is not the logging program. It is getting the K3S to
> communicate with WSJT-X
>
> Hello Terry,
>
> Where would I find VCP in Device Manager?
>
> 73,
>
> Michael KB1JEY
>
> --
> Michael L. Davis
> 533 Tennis Avenue
> Ambler, PA 19002-6016
> email: Michael.Davis@alumni.duke.edu
> mobile: 203-562-0640
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|