Hello Terry,
Forgot to mention that the K3S configuration is set to USB.
73,
Michael KB1JEY
>
>
>
>
> Hello Terry,
>
>
> FYI.
>
>
>
>
>
> 73,
>
>
> Michael KB1JEY
>
>
> ------
>
>
> > Michael,
>
> >
>
> > Right click on the start icon in Windows and select device
manager
> from
>
> > the
>
> > drop down. In device manager select com ports. When you plug in
the
> USB
>
> > cable a new com port should appear if you have the correct
FTDI
> driver
>
> > loaded
>
> >
>
> > Have you verified in the K3S menu that the com port is set
to
> USB?
>
> >
>
> > Terry
>
> >
>
> > On Mon, Jan 9, 2023, 7:06 PM Michael Davis
> <michael@bassettconsulting.com>
>
> > wrote:
>
> >
>
> >> Hello Scott,
>
> >>
>
> >> The problem is not the logging program. It is getting the
K3S
> to
>
> >> communicate with WSJT-X
>
> >>
>
> >> Hello Terry,
>
> >>
>
> >> Where would I find VCP in Device Manager?
>
> >>
>
> >> 73,
>
> >>
>
> >> Michael KB1JEY
>
> >>
>
> >> --
>
> >> Michael L. Davis
>
> >> 533 Tennis Avenue
>
> >> Ambler, PA 19002-6016
>
> >> email: Michael.Davis@alumni.duke.edu
>
> >> mobile: 203-562-0640
>
> >>
>
> >
>
>
>
>
>
> --
>
> Michael L. Davis
>
> 533 Tennis Avenue
>
> Ambler, PA 19002-6016
>
> email: Michael.Davis@alumni.duke.edu
>
> mobile: 203-562-0640
>
>
--
Michael L. Davis
533 Tennis Avenue
Ambler, PA 19002-6016
email: Michael.Davis@alumni.duke.edu
mobile: 203-562-0640
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|