Ur firmware is wrong...
On Fri, Mar 3, 2017 at 7:39 PM, Donald M. Ross via VHFcontesting <
vhfcontesting@contesting.com> wrote:
> Because those are the European 2m and 70cm bands?
>
> -----Original Message-----
> From: VHFcontesting [mailto:vhfcontesting-bounces@contesting.com] On
> Behalf
> Of mike repinski via VHFcontesting
> Sent: Friday, 3 March, 2017 18:36
> To: vhfcontesting@contesting.com
> Subject: [VHFcontesting] Yaesu 736R question
>
> I am trying to fix a 736. The CPU board was replaced. The board was
> purchased off Ebay. The board came from Europe. The radio will cover
> 144-146
> and 430-440. The diodes are correct on the 2 meter and 430 boards. I am not
> sure why it is only covering these frequencies? Any insight. Thanks Mike
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|