VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] looking for short chair ideas

To: <vhfcontesting@contesting.com>
Subject: Re: [VHFcontesting] looking for short chair ideas
From: "Bill Bailey, KG4NZR" <kg4nzr@cfl.rr.com>
Reply-to: "Bill Bailey, KG4NZR" <kg4nzr@cfl.rr.com>
Date: Thu, 5 Jun 2008 01:44:52 -0400
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>

--------------------------------------------------
From: "Walter - K5EST" <walter.k5est@gmail.com>
Sent: Wednesday, 04 June, 2008 3:22 PM
To: <vhfcontesting@contesting.com>
Subject: Re: [VHFcontesting] looking for short chair ideas

> On Wed, Jun 4, 2008 at 12:48 PM, John D'Ausilio <jdausilio@gmail.com> 
> wrote:
>> Previously I've used a long bench for seating in the Jitney .. I'd
>> like to find something more chair-like, but it can't be much more than
>> 12-13" high at the seat. Anyone got any ideas/suggestions?
>>
>> de w1rt/john
>> _______________________________________________
>>
>
> John,
>
> Its 2 inches higher that you were thinking, But Harbor Freight has
> a Mechanic's stool for $21.99. There should be somewhere around
> you that would have something similar.
> http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=46319
>
> 73....Walter - K5EST

Remove those spiffy non-marring rollers and you're close to the requisite 13 
inches.

Bill Bailey, KG4NZR
Kissimmee, FL
Osceola County, Grid EL98hg 

_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>