VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] vucc

To: "Kenneth E. Harker" <kenharker@kenharker.com>,"VHF Contesting" <vhfcontesting@contesting.com>
Subject: Re: [VHFcontesting] vucc
From: "//WBR//" <wbr@verizon.net>
Date: Thu, 15 Feb 2007 19:58:06 -0500
List-post: <mailto:vhfcontesting@contesting.com>
A-Men!

Duh!

wbr
----- Original Message ----- 
Subject: Re: [VHFcontesting] vucc


>    I think people are making this too complicated.  Draw a 
> circle of 200 kilometers in _diameter_ (100 kilometers radius),
> centered on your home QTH or somewhere else, and that's the 
> footprint inside of which you can make QSOs for a single VUCC 
> award.
> 
> On Mon, Feb 12, 2007 at 04:15:29PM -0800, Eric Smith wrote:
>> Actually, the "pie slice" shape would be more technically
>> correct as Frank, K3UHF pointed out earlier.  The Absolute
>> Max. distance between home and QTH#1 is 200 Km, and the DX
>> to QTH #2, three, etc. could be no more than 200Km away
>> from home or QTH#1...  just to be safe.  To draw this on a
>> map, dig out the divider and scale, place pivot of divider
>> at home QTH.  Spread divider to 200Km scale, pick a point
>> to operate from.  Swing an arc 100km either side of the
>> point, (linear distance, but on the arc) draw lines from
>> these points on the arc back to home.  Everything inside
>> this space could be considered "safe"
>> for awards purposes, I think...
>> Eric
>> KB7DQH
>> _______________________________________________
>> VHFcontesting mailing list
>> VHFcontesting@contesting.com
>> http://lists.contesting.com/mailman/listinfo/vhfcontesting
> 
> -- 
> Kenneth E. Harker WM5R
> kenharker@kenharker.com
> http://www.kenharker.com/
> 
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>