Hi Bill,
Ironically, I was using a DEM TIB :-) I agree they make transverter
interfacing a snap. However, you have to keep an eye on them as mine
drifted up in power. Not surprising in a Rover environment. I don't
fault the TIB, it was purely my fault. I should have checked the drive
levels before I set out on my Rover trip. Live and learn.
I have the transverter on the bench now. I'll get a chance to check it
out in another day or two. Looking over the schematic, there is a 150
ohm chip resister on the input that looks to be a likely suspect...
73
Dan
--
K9ZF /R no budget Rover ***QRP-l #1269
Check out the Rover Resource Page at: http://www.qsl.net/n9rla
List Administrator for: InHam+grid-loc+ham-books
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|