[VHFcontesting] 2m DEMI Transverter Construction

[Robin Midgett <KB4IDC@comcast.net>]

Hi Jason,
I've assembled several of the 28-xxx transverters from DEMI. The kits are 
usually fairly straight forward to assemble, but I must admit that prior 
experience is a great benefit. The instructions assume the builder is 
familiar with how a transverter operates, and has some kit building 
experience. Patience is the key; don't get in a rush. Also, I've found it 
beneficial to photo copy the schematic, parts list and board layouts before 
beginning construction. I mark the photo copied sheets with high lighters 
so as to keep track of what parts I've installed. This also serves to 
preserve the originals. A muffin tin is handy for sorting parts prior to 
construction.

Test equipment: at the minimum, you'll need your IF rig interfaced to the 
transverter, and a multi-meter. Beyond that, a frequency counter to net the 
oscillator is essential. A power meter to measure the RF out is also a good 
tool to have. As a step by step measure, you can build by transverter 
stages, testing each one as you complete each stage. I usually start with 
the oscillator.

As for interfacing to the TS-850, DEMI offers an interface box for 
transverters and the TS-850 specifically. I use one of these, and it is a 
very handy piece of equipment, especially if you plan to use the 850 for HF 
operation and a transverter driver.

If you run into difficulties, Steve at DEMI is very good about providing 
telephone support. Also, I'm happy to help if I can; feel free to contact me.


> Today's Topics:
>
>    1. DEM 2m Transverter (144-28CK) Kit (DUGAS, JASON A. (JSC-EP) (NASA))
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 18 Aug 2004 11:07:24 -0500
> From: "DUGAS, JASON A. (JSC-EP) (NASA)" <jason.a.dugas@nasa.gov>
> Subject: [VHFcontesting] DEM 2m Transverter (144-28CK) Kit
> To: "'vhfcontesting@contesting.com'" <vhfcontesting@contesting.com>
> Message-ID:
>         <85C9C005BF775C489985049627BD5E78CF9250@jsc-mail07.jsc.nasa.gov>
> Content-Type: text/plain
>
> Just curious ifanyone on this list has any experience with putting 
> together the 144-28CK kit from DEM?
>
> I've done a couple kits before but have never done any RF kits per 
> se...Curious as to the difficulty level and what the minimum amount of 
> test equipment that I would need.  I don't have much equipment at home but 
> do have access to an electronics lab that I could use from time to time 
> for quick testing, etc.
>
> Planning on using this transverter with a TS-850S/AT.  Would appreciate 
> any comments or advice.
>
> 73 de KB5URQ
>
>
> ------------------------------

Thanks,
Robin Midgett KB4IDC
VHF+ Glutton
God Bless America, in God we trust.


_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting