Brad:
NEC says the bonding conductor should be #6.
73 deGene Smar AD3F
On Friday, August 18, 2023 at 05:54:19 PM EDT, john simmons
<jasimmons@pinewooddata.com> wrote:
See the Motorola R56 book. Make sure your heart meds are up to date.
-de John NI0K
-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of K8ZM
Sent: Friday, August 18, 2023 10:33 AM
To: towertalk@contesting.com
Subject: [TowerTalk] Shack to service entrance ground
I am getting close to my project of completely re-doing all coax and control
cables entering the shack and "finally" have almost everything. I'll be
installing an 8 Ft (5/8" Dia) ground rod at the shack entrance and need to tie
that to my service entrance ground however my service entrance is 100 Ft from
the shack so extending that and burying it will be a PITA but necessary
none-the-less. Loaned or misplaced my NEC book but I had planned running 6 Ga
stranded copper wire to tie both ground rods together. Is code 6 Ga or 4 Ga ??
Funny but I keep thinking this will end up being an "exercise" as everything
works like a champ as it is, just changing coax lengths I fear will cause all
kinds of grief..it shouldn't but..
Thanks,
Brad, K8ZM
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|