John KK9A,
Thanks for the info. I need to check on the model number of the cable in my
barn.
73,
J. Gordon "Gordie" Beattie, Jr., W2TTT
201.314.6964
W2TTT@ATT.NET
Gordon.BeattieJr@VIAVISolutions.com
Get On The Air!
________________________________
From: TowerTalk <towertalk-bounces@contesting.com> on behalf of john@kk9a.com
<john@kk9a.com>
Sent: Monday, August 15, 2022, 8:52 PM
To: towertalk@contesting.com <towertalk@contesting.com>
Subject: Re: [TowerTalk] Need connector install instructions for COMMSCOPE
Cable CR-1070
https://www.surplussales.com/Connectors/HardL-5.html has 1070 connectors
John KK9A
Tim Duffy k3lr wrote:
Hi Gordon
I wish the connector directions were on any website - they are not
I found a coring tool on eBay - so I think I am set there.
Let me know if you have connectors
73
Tim K3LR
From: James Gordon Beattie Jr [mailto:w2ttt at att.net]
Sent: Monday, August 15, 2022 8:02 PM
To: Tim Duffy; reflector -tower
Subject: Re: [TowerTalk] Need connector install instructions for COMMSCOPE
Cable CR-1070
Tim,
I'll need to check the cable type on hand here, but I think I have some 7/8"
Commscope cable and connectors. What are my options for a coring tool?
I'm assuming that the connector directions are on their web site.
Any thoughts?
73,
J. Gordon "Gordie" Beattie, Jr., W2TTT
201.314.6964
W2TTT at ATT.NET
Gordon.BeattieJr at VIAVISolutions.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|