Towertalk
[Top] [All Lists]

Re: [TowerTalk] Need connector install instructions for COMMSCOPE Cable

To: Tim Duffy <k3lr@k3lr.com>, 'reflector -tower' <towertalk@contesting.com>
Subject: Re: [TowerTalk] Need connector install instructions for COMMSCOPE Cable CR-1070
From: James Gordon Beattie Jr <w2ttt@att.net>
Date: Tue, 16 Aug 2022 07:09:21 +0000
List-post: <mailto:towertalk@contesting.com>
Tim,
OK, so I might be in for an adventure depending on the actual cable type.  I'm 
glad you found the right tool for your cable.  I will need to check on the 
exact Commscope cable type and see where that leaves me for coring tool.  I 
should have connectors, but I need to double check.
Be well!

73,
J. Gordon "Gordie" Beattie, Jr., W2TTT
201.314.6964
W2TTT@ATT.NET
Gordon.BeattieJr@VIAVISolutions.com


Get On The Air!


________________________________
From: Tim Duffy <k3lr@k3lr.com>
Sent: Monday, August 15, 2022, 8:03 PM
To: 'James Gordon Beattie Jr' <w2ttt@att.net>; 'reflector -tower' 
<towertalk@contesting.com>
Subject: RE: [TowerTalk] Need connector install instructions for COMMSCOPE 
Cable CR-1070

Hi Gordon
I wish the connector directions were on any website – they are not
I found a coring tool on eBay – so I think I am set there.
Let me know if you have connectors

73
Tim K3LR

From: James Gordon Beattie Jr [mailto:w2ttt@att.net]
Sent: Monday, August 15, 2022 8:02 PM
To: Tim Duffy; reflector -tower
Subject: Re: [TowerTalk] Need connector install instructions for COMMSCOPE 
Cable CR-1070

Tim,
I'll need to check the cable type on hand here, but I think I have some 7/8" 
Commscope cable and connectors.  What are my options for a coring tool?
I'm assuming that the connector directions are on their web site.
Any thoughts?

73,
J. Gordon "Gordie" Beattie, Jr., W2TTT
201.314.6964
W2TTT@ATT.NET
Gordon.BeattieJr@VIAVISolutions.com


Get On The Air!


________________________________
From: TowerTalk <towertalk-bounces@contesting.com> on behalf of Tim Duffy 
<k3lr@k3lr.com>
Sent: Sunday, August 14, 2022, 2:43 PM
To: reflector -tower <towertalk@contesting.com>
Subject: [TowerTalk] Need connector install instructions for COMMSCOPE Cable 
CR-1070


Need to install CR1070DF DIN female connectors on CR-1070 cable.

COMMSCOPE CR-1070, Cell ReachR Standard Coaxial Cable, smoothwall copper,
7/8 in.

Do you have a coring tool and connector installation instructions for this
cable?

73

Tim K3LR







_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>