Towertalk
[Top] [All Lists]

Re: [TowerTalk] 160M vertical dipole ?

To: Robert Harmon <k6uj@pacbell.net>, towertalk <towertalk@contesting.com>
Subject: Re: [TowerTalk] 160M vertical dipole ?
From: W7TMT - Patrick <W7TMT@outlook.com>
Date: Sun, 23 Jan 2022 18:02:33 +0000
List-post: <mailto:towertalk@contesting.com>
W4RNL wrote about bent dipoles here:
http://www.antentop.org/w4rnl.001/gup4.html

KK4OBI has an extensive presentation of modeling results for bent dipoles and 
verticals here:
https://www.qsl.net/kk4obi/

K2QK has information about a "Double L" antenna that might be of interest here:
http://www.yccc.org/Articles/double_l.htm

73,
Patrick, W7TMT

-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Robert Harmon
Sent: Sunday, January 23, 2022 09:47
To: towertalk <towertalk@contesting.com>
Subject: [TowerTalk] 160M vertical dipole ?

No I don't have a 260 foot tower :-)    but thinking about this crazy idea.  

My HDX590 tower is 90 feet fully extended.  By attaching to the side of the 
mast 15 feet up I can have an attachment point at 105 feet.
I am envisioning hanging a vertical dipole from the 105 feet point and running 
the top wire horizontally 82 feet sloping down to a 30 foot mast at the corner 
of my property.  Likewise on the lower end of the dipole 9 feet high and going 
to the other corner of my property.  This woud put the center of the dipole 
about 57 feet 
above the ground.  I don't know how a dipole will work with the ends bent this 
way but maybe it would be more efficient than a vertical with a compromise 
radial field.   
An option might be to make two big boy loading coils and shorten the dipole.   
What do you think of this idea ?  Am I off my rocker ?  hihi

Bob
K6UJ

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>