Towertalk
[Top] [All Lists]

Re: [TowerTalk] Control and coax cable removal question

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Control and coax cable removal question
From: john@kk9a.com
Date: Thu, 15 Oct 2020 06:47:38 -0500
List-post: <mailto:towertalk@contesting.com>
Or you can cut the PVC pipe and replace the small portion that has the spray foam and remove the wires at the same time.

BTW, I am not an electrician so do your research but I believe that it is a towertalk myth that you cannot run the 120v crank up tower motor wires in the same conduit as your control lines (assuming that all wires have the same 600v insulation)

John KK9A


jimlux wrote:


DO you need to preserve the cables? or can you cut them, and then use a
roto-rooter/plumbers snake approach to clear the conduit?


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>