To: | towertalk@contesting.com |
---|---|
Subject: | Re: [TowerTalk] Radials vs. cows |
From: | Mac <libbysales@austin.rr.com> |
Date: | Wed, 31 Jul 2019 08:25:17 -0500 |
List-post: | <mailto:towertalk@contesting.com> |
I'm getting all in on these FFA and Farm and Ranch reporting tips we're
getting here on TT no less. Pleasantly impressed with the wide range of
experiences being shared.
best: mac/mc w5mc On 7/30/2019 7:20 PM, terry burge wrote: FWIW, While I was building my 80 meter 4-square when I made the mistake of not making sure the neighbors goat could not reach it. Was a surprise to see my sloper moving around to the NE. When I got up there the goat (Elinor) was fit to be tied and wasn't happy to have me near her. I had to hold onto her horns while doing surgery to the sloper and dacron line. Luckily she did not cut herself but she wasn't too happy to have me in her pasture. If she had of been a cow I doubt I could have kept my neighbor from knowing about it. Cows are so much more uncooperative. So I suspect you ought to go with elevated radials and serious strong supports. You know the cattle will rub and scratch themselves on the supports. And if you have ever been in the midst of cattle when they decide to stampede (Exit stage right!) you won't want to be there again. If there is a bull around you best be friendly to him. Terry KI7MOn July 30, 2019 at 1:57 PM Jim Brown <jim@audiosystemsgroup.com> wrote: You didn't say for what band. If for 160 or 80, I'd go with elevated radials if practical. The good advice I've gotten (from N6BT) is that 18 ft is sort of a minimum height for 160, so half that for 80. Also, of course, per N6LF, eight is better than four, because it maximizes the uniformity of current distribution on the radials. My elevated radials for 160 worked a lot better after I raised them from about 6 ft to about 18 ft. 73, Jim K9YC On 7/30/2019 12:14 PM, Gary Johnson wrote:I’m about to put in a radial field but the area is infested with Angus. Terrain is in its natural state, never graded, planted or anything, just coarse grass and weeds and pretty rocky and uneven. I was hoping to use lawn staples (lots of them) as they seem to have a very good grip in this soil. My concern is that the cows will snag the wires or pull them up while grazing. Then I’m stuck trying to shallow-bury everything... ugh. Anyone have any experience or advice on cows vs. radials? Gary NA6O _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk_______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk_______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [TowerTalk] measuring impedances with a VNA, Máximo EA1DDO_HK1H |
---|---|
Next by Date: | Re: [TowerTalk] Radials vs. cows, john |
Previous by Thread: | Re: [TowerTalk] Radials vs. cows, terry burge |
Next by Thread: | [TowerTalk] FW: Radials vs. cows, maflukey |
Indexes: | [Date] [Thread] [Top] [All Lists] |