I do have a DXE plate, but then you have to buy the Saddle Clamp, and other
pieces separately. I've always had good luck with the LJE round plates, but
their link seems to have disappeared.
LJ
-----Original Message-----
>From: W0MU Mike Fatchett <w0mu@w0mu.com>
>Sent: Aug 24, 2018 10:46 AM
>To: towertalk@contesting.com
>Subject: Re: [TowerTalk] Solid 160 radial plates?
>
>DXE makes great radial plate. That is really not what the question is
>about.
>
>
>On 8/24/2018 10:30 AM, larryj@teleport.com wrote:
>> I've used the LJE (Lance Johnson Engineering) Radial Plates for some of my
>> HF Vertical antennas. I've been trying to find a link to order another one,
>> but haven't been successful. Does anyone know where/how to order one? They
>> were very convenient.
>>
>> LJ
>>
>>
>> -----Original Message-----
>>> From: Chick Allen via TowerTalk <towertalk@contesting.com>
>>> Sent: Aug 24, 2018 7:21 AM
>>> To: towertalk@contesting.com
>>> Subject: [TowerTalk] Solid 160 radial plates?
>>>
>>> I've been reading a lot of older threads about using ground shields (mesh
>>> or solid copper ground radial plates) at the base of an Inverted L for 160.
>>> Several contend that AM broadcast stations use copper shielding at the
>>> base feedpoint with radials attached around the perimeter as currents are
>>> max there. Even the length of the radials becomes a question as one thread
>>> says the velocity factor of radials on the ground is 0.50 and the at the
>>> proper radial length, for on ground/slightly buried radials, is more like
>>> 80 feet and not one quarter wavelength. Buried radials do not need to be
>>> resonant so my question centers more on the use of a solid, or mesh,
>>> material at the base. Comments on this practice please?
>>>
>>>
>>> Chick, NW3Y
>>> ___________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|