Sent from my BlackBerry 10 smartphone on the Rogers network.
Original Message
From: Grant Saviers
Sent: Sunday, September 24, 2017 18:59
To: Jim Thomson; towertalk@contesting.com
Subject: Re: [TowerTalk] turnbuckle safety wires
Jam nuts (on both LH :& RH threads) are common but not universal on
''
rigging tensions. Then silicon)))55 . For a max effort, 4 x nylocks could be
used,
> 2 at each end. But a simple safety wire would be a lot simpler.... like
> something made from 10 –12' ga solid steel..and
> fed through everything. And yes, I have had a turnbuckle come right
> off....twice, on a previous inst !:@:6'll back in 1977. It was
> elevated a good 10-12 ft above ground too, so no chance it was vandals. Why
> that one turnbuckle and never the other 2 baffles
> me. The fix was a safety wire fed through everything.
>
> Jim VE7RF
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|