Has anyone seen a turnbuckle that also had nuts or nylocks on one or both
sides of where each threaded rod screws in ?
To pull that off, the nuts at one end would have to be reverse threaded. For
a max effort, 4 x nylocks could be used,
2 at each end. But a simple safety wire would be a lot simpler.... like
something made from 10 –12 ga solid steel..and
fed through everything. And yes, I have had a turnbuckle come right
off...twice, on a previous install back in 1977. It was
elevated a good 10-12 ft above ground too, so no chance it was vandals. Why
that one turnbuckle and never the other 2 baffles
me. The fix was a safety wire fed through everything.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|