Roger that, Chris. I'm guessing Davis and TMW are quite close in
spec... I'll go give them a look.... I love me some TMW stuff though...
Been using it for years commercially and it has NEVER let me down. :-)
______________________
Clay Autery, KY5G
On 6/7/2017 8:57 AM, Chris wrote:
> Davis BuryFlex is pretty darn close to it. It has a very good PE jacket,
> both for wear resistance, water resistance and sun resistance.
>
> Chris
> KF7P
>
>
>
>
>
>
>
>
> On Jun 7, 2017, at 7:47 AM, Clay Autery wrote:
>
>> KF7P, yes... Chris's stuff looks fantastic. Thanks for the tip.
>> Yes, the Times part numbers ending in -DB for direct burial are UV
>> resistant... NO cable stock that I am aware of is UV proof... :)
>>
>> 73,
>>
>> ______________________
>> Clay Autery, KY5G
>>
>> On 6/7/2017 6:40 AM, WK1W-Ivan Shapiro wrote:
>>> K47P makes agreat standoffs. I bought a set for my UST.
>>> Regarding keeping coax off the ground: I use "split=loom"....spelling, like
>>> used in automobile engines to protect wires. Kf7P's standoffs have more
>>> area within so more coax and other wires can be put in. The black
>>> split-loom hold 4 LMR400s=ultraflex, control wire for rotor, cat5-e for
>>> camera control, "siamese" cable (18-2 forn 24VAC for camera power and 75 ohm
>>> for analog camera feed. One more thing: protects the coax from UV, though I
>>> understand that BURYFLEX is not UV sensitive (have not used it yet, only
>>> LMR400 UF.
>>> 73
>>> Ivan
>>> WK1W
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|