Thank you sir... You and I will be talking... hopefully soon. :-)
I'm pretty much sold on the arch arm concept... And I've watched enough
videos now to see that properly done, there is zero to worry about.
You've got some other stuff I "need" too. ;-)
______________________
Clay Autery, KY5G
(318) 518-1389
On 6/7/2017 9:05 AM, Chris wrote:
> Jim/Clay,
>
> I have an instruction manual that goes over install, but here's teh condensed
> version: When you attach cables to each arm, start with the tower at full
> height with the cable hanging. Mark where the cable touches the ground and
> add two feet for each arm you're attaching (add two feet of slack per arm).
> Then lower the tower and attach coax at each arm loosely with zip ties so you
> can adjust lengths. Then run up the tower and check positioning, adjust as
> necessary. When everything is perfect, tape cables to arm with scotch 33 and
> you're good to go. I've never had a problem with snagged cables as the arms
> keep the cables away from the tower. AND! NEVER! raise or lower a tower
> without standing right there watching things. Murphy is always ready to
> strike when you're not paying attention.
>
> Chris
> KF7P
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|