Davis BuryFlex is pretty darn close to it. It has a very good PE jacket, both
for wear resistance, water resistance and sun resistance.
Chris
KF7P
On Jun 7, 2017, at 7:47 AM, Clay Autery wrote:
> KF7P, yes... Chris's stuff looks fantastic. Thanks for the tip.
> Yes, the Times part numbers ending in -DB for direct burial are UV
> resistant... NO cable stock that I am aware of is UV proof... :)
>
> 73,
>
> ______________________
> Clay Autery, KY5G
>
> On 6/7/2017 6:40 AM, WK1W-Ivan Shapiro wrote:
>> K47P makes agreat standoffs. I bought a set for my UST.
>> Regarding keeping coax off the ground: I use "split=loom"....spelling, like
>> used in automobile engines to protect wires. Kf7P's standoffs have more
>> area within so more coax and other wires can be put in. The black
>> split-loom hold 4 LMR400s=ultraflex, control wire for rotor, cat5-e for
>> camera control, "siamese" cable (18-2 forn 24VAC for camera power and 75 ohm
>> for analog camera feed. One more thing: protects the coax from UV, though I
>> understand that BURYFLEX is not UV sensitive (have not used it yet, only
>> LMR400 UF.
>> 73
>> Ivan
>> WK1W
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|