Towertalk
[Top] [All Lists]

Re: [TowerTalk] Cad Welding tips

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Cad Welding tips
From: N3AE <n3ae@comcast.net>
Date: Tue, 1 Nov 2016 14:27:39 +0000 (UTC)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Erico's Cadwelds have the coarse grain thermite and the fine grain starter 
powder in the same little container, with the starter powder in the bottom so 
it ends up on top when you pour it in.   Problem is that the two can mix in 
shipping making them hard to light off.  A Cadweld box is marked "this end up" 
for a reason.  One solution is to use the electric ignition product (available 
RF Connections and rent/buy the igniter box) or use another brand, Harger, 
which you can get from KF7P.  The Harger uni-shots have the two powders 
separated so they can't mix in shipment.  Having used both, I prefer the 
Harger.  I use a sparkler on a short stick (and gloves) to light them off.

Shawn
N3AE
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>