I believe that there are crimp on DIN connectors for RG style coax but I
have not seen any Amphenol solder-on ones. I use UHF connectors when
attaching RG-213 to Heliax. If they are not available, and I have never
seen UHF AVA5 connectors, than I would use N. Otherwise you will need an
adapter and I think those are typically DIN to N. N connectors are dirt
cheap and work well if properly installed.
John KK9A
To: towertalk@contesting.com
Subject: [TowerTalk] DIN to coax connector?
From: Paul Staupe <staupe@gmail.com>
Date: Thu, 1 Sep 2016 08:54:46 -0500
I really like the idea of using DIN connectors rather than N type on a
couple of AVA5-XL 7/8" Heliax runs I've got. At the rotor point, I need to
transition to 1/2" Buryflex per a previous discussion.
All I see out there are male DIN to AVA-4 connectors which are reasonablly
priced, but I'm doubtful they would work very well. Anybody have some
advice?
73,
Paul W0AD
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|