The only problems I have had with Nylocks are:
1. welding too close to them and softening the plastic., and
2. reusing them too many times.
If there had been any UV deterioration problems within my personal
experience I would start painting over the exposed Nylon with a
UV/environment proofing material to ameliorate the effect.
Nylocks are just too nifty and convenient to stop using them because UV
eats them (if it does in any specific circumstances.)
On 1/11/2016 11:22 AM, David Robbins wrote:
two things... I have never had a problem with nylocks used on the m2 antennas
and have had some up for quite a few years now.
Roger, I believe you, but you are the only person I know who's had problems
with nylock nuts. I think you got a bad batch.
Chris
KF7P
On Jan 11, 2016, at 7:42 AM, Roger (K8RI) on TT wrote:
I rebuilt, or more like, reassembled a C19XR. Tubing cleaner brushes work very well at
removing the crud from ~4" from the ends. A few brass barrel brushes with the
extensions powered with an electric drill motor will easily go the 6 or 8 inches inside
the tube ends which should be more than enough,. Use the swabs (2 or 3" long) to
apply your lube and antioxidant of choice. They will easily coat the inside uniformly.
The ultra-fine Scotch Bright pads do a real nice job on the outside of the matching tube.
I didn't get it up soon enough so now I need to replace three tubes on one end
of the 20 meter reflector. Someone (not me) ran into the reflector with one of
the rear wheels of a zero turning radius lawn mower
My work won't look near as nice as the projects shown. I only cleaned the
mating surfaces for tubes and straps. Insulators were in good shape.
I have lots of SS rivets and screws. As I mentioned in another post. I like the
Nylock nuts, but they just don't last around here.
73
Roger (K8RI)
On 1/11/2016 Monday 9:11 AM, Tom_N2SR via TowerTalk wrote:
Nice work!
One thought about cleaning aluminum. A few years ago, I posted here looking for a way to
clean up aluminum that was sitting in the dirt. Someone suggested HVAC coil cleaner. I
was able to get a small container of the stuff, and WOW does it work. It's very caustic,
and you'll have to wear good gloves and old clothes, but it works extremely well, and
it's probably much cheaper than the Locktite product you used. I used the coil cleaner
straight, applied it with old rags (they will disintegrate as you used them!), let it sit
a bit, and use the garden hose to spray the stuff off. The booms and tubing looked 100%
better. Not like brand new "polished" tubing, but still much better than having
it look grungy.
Tom, N2SR
From: Howard Hoyt
To: towertalk@contesting.com
Sent: Sunday, January 10, 2016 11:03 PM
Subject: Re: [TowerTalk] Force 12 rebuild
Hi all,
All the talk about older Force 12 linear loading vs. Tornado coil
upgrades inspired me to rebuild a 20-yr old C-4SXL I have had stored in
pieces for a few years. I took some pictures along the way, and you can
read about the process here:
https://proaudioeng.com/force-12-c-4sxl-rebuild/
I appreciate all the knowledge I have gained from this group that helped
me with the project, your comments and abuse are welcomed.
Cheers & 73,
Howie - WA4PSC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
--
73
Roger (K8RI)
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|