According to the link, you use Nylock nuts. How do you get the nylon to
last?
I've had very bad luck with Nylock nuts. All I've used had lost most of
the nylon within 2 years and were no longer functional. When new they
were great.
I live in Southern Michigan (43'37"N) and a ground elevation of only
630' MSL so UV isn't normally much of a problem, but lock nuts with
short life are.
We will see very few days above freezing (if any) for at least the next
two months unless we get an above normal winter like 3 years ago.
73
Roger (K8RI)
.
On 1/10/2016 Sunday 11:03 PM, Howard Hoyt wrote:
Hi all,
All the talk about older Force 12 linear loading vs. Tornado coil
upgrades inspired me to rebuild a 20-yr old C-4SXL I have had stored
in pieces for a few years. I took some pictures along the way, and
you can read about the process here:
https://proaudioeng.com/force-12-c-4sxl-rebuild/
I appreciate all the knowledge I have gained from this group that
helped me with the project, your comments and abuse are welcomed.
Cheers & 73,
Howie - WA4PSC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
--
73
Roger (K8RI)
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|