Towertalk
[Top] [All Lists]

Re: [TowerTalk] Force 12 rebuild

To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Force 12 rebuild
From: Bryan Swadener via TowerTalk <towertalk@contesting.com>
Reply-to: Bryan Swadener <bswadener@yahoo.com>
Date: Mon, 11 Jan 2016 22:52:26 +0000 (UTC)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
No. However, they sell left-handed metric screwdrivers and pilot wrenches. 
They're in the same department as the sky hooks and chin nuts 
at http://kalecoauto.com/;-)
vy 73,
 Bryan WA7PRC

 
      From: W5GN <w5gn@mxg.com>
 To: 'Bryan Swadener' <bswadener@yahoo.com> 
 Sent: Monday, January 11, 2016 2:24 PM
 Subject: RE: [TowerTalk] Force 12 rebuild
   
And, I presume,  Left Hand Crescent Wrenches.

73 

Barry, W5GN

-----Original Message-----
From: Bryan WA7PRC
Sent: Monday, January 11, 2016 2:53 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Force 12 rebuild

You can buy Elbow Grease from KaleCoAuto (http://kalecoauto.com/ $6.99). They 
also sell other fine products such as turn signal blinker fluid, muffler 
bearings, and Johnson rods. Don't delay, shop today!
Sorry Roger, no prop wash.
vy 73,Bryan WA7PRC
 
    Date: Mon, 11 Jan 2016 14:15:32 -0500
From: "Roger (K8RI) on TT" <K8RI-on-TowerTalk@tm.net>
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Force 12 rebuild

Elbow grease, second shelf, 3rd aisle, right next to the buckets of prop wash.

I hope it was a bad batch, because I like them.  My Dayton winch uses some big 
ones

73

Roger  (K8RI)

On 1/11/2016 Monday 12:22 PM, David Robbins wrote:
> two things... I have never had a problem with nylocks used on the m2 antennas 
> and have had some up for quite a few years now.
>
> second, where can I buy a bucket of that elbow grease, got a few things I 
> could use that for!   
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>