Bryan et al,
Yes, I'm located in Western Brazil. As I have explained on previous emails,
import and remaining taxes will add another 70% on the top of piping and
freight thus, the reason for building my antennas instead of buying them.
There are some aluminum mills within Brazil but they require a 300Kg per
diameter minimum order. I neither have the money for that huge quantity nor a
warehouse that large to stock them.
BTW, 6061-T6 pipes are not found on shelves in my country. Special order only.
I hope the above proves helpful.
73,
Luciano Gasparini and
Sent from my HTC
----- Reply message -----
From: "Bryan Swadener" <bswadener@yahoo.com>
To: "towertalk@contesting.com" <towertalk@contesting.com>
Cc: "luciano_nachif@yahoo.com" <luciano_nachif@yahoo.com>
Subject: Re: [TowerTalk] 6061-T6 20 ft Drawn Aluminum Piping for 40m Yagi
Date: Mon, Nov 9, 2015 18:04
If his info on QRZ is correct, Luciano appears to be in Brazil. When I Googled
aluminum tube brazil, I found outfits named Sapa and Ryerson in Brazil. There
may be others.
Shapiro Metal appears to have only ≤ 72" (183 cm) lengths. For 40m, he may want
longer lengths. I suggest shopping locally.
vy 73 es gl,Bryan WA7PRC
Date: Mon, 9 Nov 2015 11:47:06 -0500
From: "john@kk9a.com" <john@kk9a.com>
To: towertalk@contesting.com
Cc: luciano_nachif@yahoo.com
Subject: Re: [TowerTalk] 6061-T6 20 ft Drawn Aluminum Piping for 40m Yagi
I have bought a lot of .058 wall 6061-t6 from Shapiro Metal on eBay.
http://stores.ebay.com/Shapiro-Metal-Supply?_trksid=p2047675.l2563 but
exporting to EU would be very expensive. Metric tubing is likely more
available to you and it will work perfectly fine.
John KK9A
Subject: [TowerTalk] 6061-T6 20 ft Drawn Aluminum Piping for 40m Yagi
From: luciano_nachif@yahoo.com via TowerTalk <towertalk@contesting.com>
Reply-to: luciano_nachif@yahoo.com <luciano_nachif@yahoo.com>
Date: Mon, 09 Nov 2015 12:03:44 -0200
Dear colleagues,
After receiving answers to my previous emails regarding a 40m antenna
recommendation, I decided to build my own using the information provided
on the
22nd ARRL Antenna Book.
The antenna has a 32ft boom and uses 6061-T6 aluminum piping.
Shall I use drawn piping instead of extruded ones?
Where can I buy 2-1/4" and 2" with 0.083" wallthickness and 20 feet long
6061-T6 drawn aluminum piping?
I will also need 1", 7//8" and 3/4" by 0.058" wallthickness and 20ft long
6061-T6 drawn aluminum piping.
Could anyone lead me to a good store within the US that I can import such
tubes
and associated plates for build such antenna, please?
Has anyone on this list ever built that antenna?
73,
Luciano Gasparini PT9KK
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|