Luciano,
You might try a glass/window company (or curtainwalls) as they use 6061 T6
aluminum in most of their products for windowall and curtainwall. It might be
also possible to find some square tubing using sizes that would go into each
other.
Another thought is to check out hand-rail suppliers as the top rails of
handrails are often round.
GL OM
FredKC5YN
On Monday, November 9, 2015 4:31 PM, "luciano_nachif@yahoo.com via
TowerTalk" <towertalk@contesting.com> wrote:
Bryan et al,
Yes, I'm located in Western Brazil. As I have explained on previous emails,
import and remaining taxes will add another 70% on the top of piping and
freight thus, the reason for building my antennas instead of buying them.
There are some aluminum mills within Brazil but they require a 300Kg per
diameter minimum order. I neither have the money for that huge quantity nor a
warehouse that large to stock them.
BTW, 6061-T6 pipes are not found on shelves in my country. Special order only.
I hope the above proves helpful.
73,
Luciano Gasparini and
Sent from my HTC
----- Reply message -----
From: "Bryan Swadener" <bswadener@yahoo.com>
To: "towertalk@contesting.com" <towertalk@contesting.com>
Cc: "luciano_nachif@yahoo.com" <luciano_nachif@yahoo.com>
Subject: Re: [TowerTalk] 6061-T6 20 ft Drawn Aluminum Piping for 40m Yagi
Date: Mon, Nov 9, 2015 18:04
If his info on QRZ is correct, Luciano appears to be in Brazil. When I Googled
aluminum tube brazil, I found outfits named Sapa and Ryerson in Brazil. There
may be others.
Shapiro Metal appears to have only ≤ 72" (183 cm) lengths. For 40m, he may want
longer lengths. I suggest shopping locally.
vy 73 es gl,Bryan WA7PRC
Date: Mon, 9 Nov 2015 11:47:06 -0500
From: "john@kk9a.com" <john@kk9a.com>
To: towertalk@contesting.com
Cc: luciano_nachif@yahoo.com
Subject: Re: [TowerTalk] 6061-T6 20 ft Drawn Aluminum Piping for 40m Yagi
I have bought a lot of .058 wall 6061-t6 from Shapiro Metal on eBay.
http://stores.ebay.com/Shapiro-Metal-Supply?_trksid=p2047675.l2563 but
exporting to EU would be very expensive. Metric tubing is likely more
available to you and it will work perfectly fine.
John KK9A
Subject: [TowerTalk] 6061-T6 20 ft Drawn Aluminum Piping for 40m Yagi
From: luciano_nachif@yahoo.com via TowerTalk <towertalk@contesting.com>
Reply-to: luciano_nachif@yahoo.com <luciano_nachif@yahoo.com>
Date: Mon, 09 Nov 2015 12:03:44 -0200
Dear colleagues,
After receiving answers to my previous emails regarding a 40m antenna
recommendation, I decided to build my own using the information provided
on the
22nd ARRL Antenna Book.
The antenna has a 32ft boom and uses 6061-T6 aluminum piping.
Shall I use drawn piping instead of extruded ones?
Where can I buy 2-1/4" and 2" with 0.083" wallthickness and 20 feet long
6061-T6 drawn aluminum piping?
I will also need 1", 7//8" and 3/4" by 0.058" wallthickness and 20ft long
6061-T6 drawn aluminum piping.
Could anyone lead me to a good store within the US that I can import such
tubes
and associated plates for build such antenna, please?
Has anyone on this list ever built that antenna?
73,
Luciano Gasparini PT9KK
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|