Hello-
I am preparing some feedlines for my two towers and the installation of
about 10 tower mounted (mostly VHF/UHF) antennas. I will be using 1-5/8", 7/8"
and 1/2" heliax, all going back to N-type connectors on RG-214/U rotor loops;
plus some LMR-400 coaxial connectors on the masts.
I installed some 7/8" heliax connectors that came with adhesive lined heat
shrink and I really like it. The heat shrink sealed the connector to the cable.
I wish to buy some of the same for all of my connectors, plus some to cover the
entire junction of various cables. The greatest OD change I have is from 1-5/8"
heliax (2.5" OD connector) down to an N-connector on RG-214/U (0.81"). I see
some 3:1 and 4:1 adhesive lined heat shrink on ebay (from overseas) but thought
I would ask what is the best brand or type and where to get it.
Thanks all, Byron WA5THJ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|