Just trying to help. It seems you have only a few choices, some which may be
unpalatable..
1) use larger bolts to fit the holes and find a way to make them work. (Enlarge
the mating holes on the base? Or could you use "bolts" that are custom-welded
so you have, say, 2-3/8" shafts in the holes and the correct size threaded bits
sticking out of the concrete?)
2) position the base on the pad to allow new holes to be drilled into the
concrete the correct size for the bolts. Does the base have to go exactly where
it had been?
3) pour a new base somewhere else on the property.
Without resorting to No. 3, it seems 1, 2 or some combination thereof are your
only possibilities.
73,
Kelly
Sent from my iPad
> On Oct 15, 2014, at 12:09 AM, "Marv Shelton" <marvs@att.net> wrote:
>
> the base is designed for 1-1/8 bolts.
>
> Sent from my iPad
> And YES it's cool!
>
>> On Oct 14, 2014, at 9:36 PM, <ve4xt@mymts.net> <ve4xt@mymts.net> wrote:
>>
>> Use larger bolts?
>>
>> Just sayin'
>>
>> 73, Kelly
>> Ve4xt
>>
>> Sent from my iPad
>>
>>> On Oct 14, 2014, at 11:00 PM, "Marv Shelton" <marvs@att.net> wrote:
>>>
>>> I asked a PE at work and since the holes are so much bigger than the bolt.
>>> ( the holes are 2.5" diameter, the bolts only 1.125") he said the rated
>>> strength of the epoxy is only good if the hole is no more than a half inch
>>> bigger in diameter than the bolt. I confirmed this by talking to one of the
>>> epoxy product manufacturers.
>>>
>>> Sent from my iPad
>>> And YES it's cool!
>>>
>>>>> On Oct 14, 2014, at 8:23 AM, K7LXC@aol.com wrote:
>>>>>
>>>>> Anchor bolt update:
>>>> Thanks for all the input everyone. It looks like epoxy, or at least
>>>> commercial grade stuff dispensed with a caulking gun is out as a potential
>>>> solution. It seems like the holes I made are too big.
>>>> So now I am looking at anchoring cement and trying to talk to industrial
>>>> contractors to see if there is another alternative.
>>>>
>>>> So how did you determine that your new holes won't work for putting
>>>> in your anchor bolts? The epoxy is stronger than the concrete so it seems
>>>> to me that's it's a non-issue. Are you over-thinking this?
>>>>
>>>> Cheers,
>>>> Steve K7LXC
>>>> TOWER TECH -
>>>> Professional tower services for amateurs
>>>> Cell: 206-890-4188
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|