the base is designed for 1-1/8 bolts.
Sent from my iPad
And YES it's cool!
> On Oct 14, 2014, at 9:36 PM, <ve4xt@mymts.net> <ve4xt@mymts.net> wrote:
>
> Use larger bolts?
>
> Just sayin'
>
> 73, Kelly
> Ve4xt
>
> Sent from my iPad
>
>> On Oct 14, 2014, at 11:00 PM, "Marv Shelton" <marvs@att.net> wrote:
>>
>> I asked a PE at work and since the holes are so much bigger than the bolt. (
>> the holes are 2.5" diameter, the bolts only 1.125") he said the rated
>> strength of the epoxy is only good if the hole is no more than a half inch
>> bigger in diameter than the bolt. I confirmed this by talking to one of the
>> epoxy product manufacturers.
>>
>> Sent from my iPad
>> And YES it's cool!
>>
>>>> On Oct 14, 2014, at 8:23 AM, K7LXC@aol.com wrote:
>>>>
>>>> Anchor bolt update:
>>> Thanks for all the input everyone. It looks like epoxy, or at least
>>> commercial grade stuff dispensed with a caulking gun is out as a potential
>>> solution. It seems like the holes I made are too big.
>>> So now I am looking at anchoring cement and trying to talk to industrial
>>> contractors to see if there is another alternative.
>>>
>>> So how did you determine that your new holes won't work for putting
>>> in your anchor bolts? The epoxy is stronger than the concrete so it seems
>>> to me that's it's a non-issue. Are you over-thinking this?
>>>
>>> Cheers,
>>> Steve K7LXC
>>> TOWER TECH -
>>> Professional tower services for amateurs
>>> Cell: 206-890-4188
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|