Towertalk
[Top] [All Lists]

Re: [TowerTalk] MFJ repairs

To: Craig Clark <jcclark@myfairpoint.net>, towertalk@contesting.com
Subject: Re: [TowerTalk] MFJ repairs
From: Tom Nicholson <Gunsrus1942@Comcast.net>
Date: Sun, 31 Aug 2014 17:37:16 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Craig,
I would wager that the vast majority of people here would agree with you that MFJ employees, most probably, are all "good guys" and well intended in the pursuit of making available a source of equipment for the Ham Radio community. Where management has failed is the support "after the sale"! Many fine products have failed as a result of poor or no product support. The lack of support is no reflection on the dedication and expertise of the support personnel, What it is a reflection of is the mismanagement of the support system. This CAN be remedied, BUT maybe at the cost of some management jobs. They need to have the management team address these problems or replace the team. It seems at MFJ it has reached "critical mass" and the statement has to be made:

"You are either part of the solution or you are part of the problem" and make the hard decisions from that point forward.

YMMV, but that has been my experience over the 30+ plus years that I owned a business that was 20% sales and 80% customer service.

73
Tom W1ALZ



On 8/31/2014 3:34 PM, Craig Clark wrote:
When you bash MFJ, just remember, if it was not for them, we would have no:

Hy-Gain
Cushcraft
Ameritron
Mirage
Vectronics
Ed Noll and many other books

And probably a few others that I can't remember.

I have known and worked with MFJ for over 35 years. Say what you will, they
are the good guys.

Back to towers and antennas.

Craig


Craig Clark K1QX
PO Box 209
107 Fitzgerald Rd
Rindge NH 03461
(603) 899-6103 office
(603) 520 6577 cell





_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>