Have you looked at Norm's Fabrication? http://www.normsfab.com/plates.htm
He displays in Dayton in the flea market area. I bought a bearing plate and a
rotor plate from him. IMO, they look EXACTLY like Rohn stuff. Just be warned:
the plates are galvanized, the hardware may not be (it wasn't in my case).
Tom, N2SR
On Thursday, August 7, 2014 9:41 AM, "john@kk9a.com" <john@kk9a.com> wrote:
Rohn is very proud of their BPL55G and the one I bought a year ago had too
much galvanizing in one of the legs. I spent 1/2 hour in a milling
machine trying to remove the excess. If you do not like the Rohn pricing
there may be aftermarket top plates that will suit your needs.
John KK9A
To: Towertalk <towertalk@contesting.com>
Subject:[TowerTalk] Top Bearing Plate for 55G vs Rotor Plate
From: Richard Thorne
Date: Thu, 07 Aug 2014 06:34:40 -0500
I'm working on getting the parts together for a Rohn 55g tower.
The Rohn 55g Bearing plate sure is expensive. I see two other possibilities.
1 - Use the less expensive beacon plate and drill a hole for the
mast/bearing.
2 - Use a rotor plate for the same purpose.
I plan on having a top bearing, an intermediate bearing then the rotor. I
have no idea what the thickness of the Rohn bearing plate is as compared
to a beacon or rotor plate. I'm hoping to put up a full size 4 element 40m
beam some day, so the system will need to handle a good 300+lbs.
I don't need the guy ears on the top plate as I'm going to leave the top
10 feet unguyed.
If any one has a Rohn bearing plate available let me know. I thought I had
found one the other day but it didn't work out.
Thanks
Rich - N5ZC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|