I'm working on getting the parts together for a Rohn 55g tower.
The Rohn 55g Bearing plate sure is expensive. I see two other
possibilities.
1 - Use the less expensive beacon plate and drill a hole for the
mast/bearing.
2 - Use a rotor plate for the same purpose.
I plan on having a top bearing, an intermediate bearing then the rotor.
I have no idea what the thickness of the Rohn bearing plate is as
compared to a beacon or rotor plate. I'm hoping to put up a full size 4
element 40m beam some day, so the system will need to handle a good 300+lbs.
I don't need the guy ears on the top plate as I'm going to leave the top
10 feet unguyed.
If any one has a Rohn bearing plate available let me know. I thought I
had found one the other day but it didn't work out.
Thanks
Rich - N5ZC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|