Towertalk Mailing List (date)

Towertalk Mailing List (date)

[Thread Index] [Top] [All Lists]

July 31, 2014

Re: [TowerTalk] Recommendations for an electric foldover winch?, Richard (Rick) Karlquist, 18:25
Re: [TowerTalk] Recommendations for an electric foldover winch?, Ralph Bolt via TowerTalk, 17:36
Re: [TowerTalk] Recommendations for an electric foldover winch?, Richard (Rick) Karlquist, 17:13
Re: [TowerTalk] Recommendations for an electric foldover winch?, Patrick Greenlee, 16:11
Re: [TowerTalk] Recommendations for an electric foldover winch?, Richard (Rick) Karlquist, 12:44
Re: [TowerTalk] Recommendations for an electric foldover winch?, Mike Reublin NF4L, 11:29
[TowerTalk] Recommendations for an electric foldover winch?, Fredric Serota, 10:34
[TowerTalk] 800' clean AB105C just removed, Norm via TowerTalk, 09:26

July 30, 2014

Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam, ScottW3TX@verizon.net, 23:24
Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam, W3YY, 21:41
[TowerTalk] yaesu G-2800DXA in a rohn 25 again, Keith Hanson, 21:37
Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam, Grant Saviers, 21:18
Re: [TowerTalk] yaesu G-2800DXA in a rohn 25 again, Larry, 20:30
Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam, w5gn, 17:48
Re: [TowerTalk] 40 Meter Short 2-Element Beam Recommendations, Richard (Rick) Karlquist, 17:44
[TowerTalk] 40 Meter Short 2-Element Beam Recommendations, L L bahr , 17:01
[TowerTalk] yaesu G-2800DXA in a rohn 25 again, k7awbgoog, 16:42
Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40Meter Beam, David Jordan, 15:45
Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam, EZ Rhino, 15:37
Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam, john@kk9a.com, 15:34
Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam, Rick Stealey, 15:12
Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam, RMorris, 14:40
Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam, Joe Subich, W4TV, 14:38
Re: [TowerTalk] Fwd: Guy anchor installation company in Missouri, Jack Taylor, 14:28
Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam, Ray Benny, 14:14
Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam, Richard (Rick) Karlquist, 14:02
Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam, Kim Elmore, 13:07
Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam, Rick Stealey, 12:53
Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam, Steve London, 10:25
[TowerTalk] Fwd: Guy anchor installation company in Missouri, Hans Hammarquist via TowerTalk, 08:38
Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam, john@kk9a.com, 06:55
[TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam, L L bahr , 03:21

July 29, 2014

[TowerTalk] Screw anchors, k9kl, 23:53
Re: [TowerTalk] Easy to install guy anchors (was: Re: Guy anchor installation company in Missouri), Ed Muns, 23:10
[TowerTalk] Easy to install guy anchors (was: Re: Guy anchor installation company in Missouri), Richard (Rick) Karlquist, 22:29
Re: [TowerTalk] Guy anchor installation company in Missouri, Don Moman VE6JY, 22:20
[TowerTalk] Guy anchor installation company in Missouri, Linux Mercedes, 21:56
Re: [TowerTalk] (no subject), Roger (K8RI) on TT, 19:31
Re: [TowerTalk] (no subject), Patrick Greenlee, 14:22
Re: [TowerTalk] (no subject), Ken Beals, 13:39
[TowerTalk] (no subject), Will Jones, 12:52
[TowerTalk] FW: MOV's for Polyphaser Rotor Wire Protection, Matt, 02:20

July 28, 2014

Re: [TowerTalk] Ferrite core spacing?, Roger (K8RI) on TT, 23:56
Re: [TowerTalk] Ferrite core spacing?, Jim Brown, 23:06
Re: [TowerTalk] Ferrite core spacing?, Jim Brown, 22:37
Re: [TowerTalk] Ferrite core spacing?, Drax Felton, 21:23
[TowerTalk] Ferrite core spacing?, Roger (K8RI) on TT, 21:04
[TowerTalk] MOV's for Polyphaser Rotor Wire Protection, Will Jones, 20:17
Re: [TowerTalk] Fwd: Cutting 2" Heavy Wall Cr-Mo Mast Up on, Roger (K8RI) on TT, 12:17
Re: [TowerTalk] FW: Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, Roger (K8RI) on TT, 00:59

July 27, 2014

Re: [TowerTalk] Fwd: Cutting 2" Heavy Wall Cr-Mo Mast Up on, Ray Benny, 22:12
[TowerTalk] 4-square EZNEC model wanted, Paul Baldock, 16:22
[TowerTalk] WTB: AB-621 or AB-577 Mast, Ed G, 15:34
[TowerTalk] FW: Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower - RESPONSE COMPLETE, Victor Walz, 15:07
[TowerTalk] FW: Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, Kimo C Chun, 15:01
Re: [TowerTalk] Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, Bert Rollen, 15:01
[TowerTalk] CUTTING MOLLY TUBE, Kevin Adam, 12:04
Re: [TowerTalk] Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, Pete Smith N4ZR, 10:57
[TowerTalk] Fwd: Cutting 2" Heavy Wall Cr-Mo Mast Up on, Jim Thomson, 06:15
Re: [TowerTalk] Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, Grant Saviers, 01:24

July 26, 2014

Re: [TowerTalk] Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, Earl Morse, 22:53
Re: [TowerTalk] Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, TexasRF--- via TowerTalk, 20:47
Re: [TowerTalk] Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, Bill Turner, 19:14
[TowerTalk] Cushcraft D-40 Rotory Dipole, Byron Tatum, 19:10
Re: [TowerTalk] FW: Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, J.P., 18:50
[TowerTalk] FW: Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, Victor Walz, 17:40
Re: [TowerTalk] Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, Bob K6UJ, 17:12
Re: [TowerTalk] Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, Patrick Greenlee, 17:02
Re: [TowerTalk] Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, Hector Garcia,XE2K, 16:20
Re: [TowerTalk] Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, Charlie Gallo, 15:44
Re: [TowerTalk] Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, TexasRF--- via TowerTalk, 14:42
[TowerTalk] Fwd: Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, Hans Hammarquist via TowerTalk, 14:27
Re: [TowerTalk] Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, Jim Hoge, 14:27
Re: [TowerTalk] Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, Charles Gallo, 13:56
[TowerTalk] Cutting 2" Heavy Wall Cr-Mo Mast Up on Tower, Victor Walz, 13:46
Re: [TowerTalk] HG70HD Replacement Parts, Mike Reublin NF4L, 10:56
Re: [TowerTalk] Tower and Ladder Line Interaction, Kelley, 10:54
Re: [TowerTalk] HG70HD Replacement Parts, Patrick Greenlee, 09:44

July 25, 2014

Re: [TowerTalk] HG70HD Replacement Parts, Mike Reublin NF4L, 20:40
[TowerTalk] HG70HD Replacement Parts, Bob Farkaly, 17:28
Re: [TowerTalk] HG70HD Lift Cable Replacement Knoxville TN, Don , 15:04
[TowerTalk] HG70HD Lift Cable Replacement Knoxville TN, Bob Farkaly, 14:49
Re: [TowerTalk] Creating a Yagi Build Table with "Tape Measure" Dimensions, Dan Maguire via TowerTalk, 14:13
[TowerTalk] FW: Creating a Yagi Build Table with "Tape Measure" Dimensions, Matt, 05:52
Re: [TowerTalk] Tower and Ladder Line Interaction, Roger (K8RI) on TT, 03:19
[TowerTalk] Creating a Yagi Build Table with "Tape Measure" Dimensions, Dan Maguire via TowerTalk, 02:18

July 24, 2014

Re: [TowerTalk] Tower and Ladder Line Interaction, Richard (Rick) Karlquist, 23:40
Re: [TowerTalk] Tower and Ladder Line Interaction, Roger (K8RI) on TT, 22:29

July 23, 2014

Re: [TowerTalk] Tower and Ladder Line Interaction, Edwin Karl, 18:08
Re: [TowerTalk] Tower and Ladder Line Interaction, Donald Chester, 13:38
Re: [TowerTalk] Tower and Ladder Line Interaction, Larry Loen, 12:10
Re: [TowerTalk] Tower and Ladder Line Interaction, Richard (Rick) Karlquist, 11:53
Re: [TowerTalk] Tower and Ladder Line Interaction, Kelley, 11:27
[TowerTalk] Tower and Ladder Line Interaction, Kelley, 11:06
[TowerTalk] Dual posts, Mike Reublin NF4L, 10:50
Re: [TowerTalk] N1MM and rotor control, john@kk9a.com, 10:25
Re: [TowerTalk] Coax Stripping Tool For RG8X & Crimp Style PL259, Larry Banks, 10:00
Re: [TowerTalk] 80 meter dipole, Al Kozakiewicz, 09:37
Re: [TowerTalk] Coax Stripping Tool For RG8X & Crimp Style PL259, Jim Lux, 09:13
Re: [TowerTalk] N1MM and rotor control, Tim Wininger, 08:27
Re: [TowerTalk] N1MM and rotor control, Charlie Gallo, 08:05
[TowerTalk] Coax Stripping Tool For RG8X & Crimp Style PL259, Dick, K2ZR, 05:30
Re: [TowerTalk] N1MM and rotor control, Ken Beals, 02:12
[TowerTalk] Fwd: Fwd: 80 meter dipole, Hans Hammarquist via TowerTalk, 01:41
[TowerTalk] N1MM and rotor control, Bill Straw via TowerTalk, 00:24

July 22, 2014

[TowerTalk] Coax Stripping Tool For RG8X & Crimp Style PL259, Dick, K2ZR, 22:38
Re: [TowerTalk] FW: now a dating site?, Roger (K8RI) on TT, 22:24
Re: [TowerTalk] T2X Tail Twister rotator freezes in place below 32 degrees ?, Roger (K8RI) on TT, 21:44
Re: [TowerTalk] FW: now a dating site?, john nistico, 19:19
Re: [TowerTalk] T2X Tail Twister rotator freezes in place below 32 degrees ?, Grant Saviers, 16:14
Re: [TowerTalk] T2X Tail Twister rotator freezes in place below 32 degrees ?, Roger (K8RI) on TT, 14:03
Re: [TowerTalk] HFTA - move to anouter computer, N2TK, Tony, 11:36
[TowerTalk] HFTA - move to anouter computer, N2TK, Tony, 11:04
[TowerTalk] HFTA now working on Win 8.1 and Win 7 Home Premium PCs, William Hein, 10:00
[TowerTalk] Glen Martin Roof Tower & Rotor, Tom-W3FRG, 07:02

July 21, 2014

Re: [TowerTalk] T2X Tail Twister rotator freezes in place below 32 degrees ?, Jon Pearl - W4ABC, 23:44
[TowerTalk] T2X Tail Twister rotator freezes in place below 32 degrees ?, Dick, 21:51
[TowerTalk] HAM Rotor Question Answered, Richard Solomon, 20:18
[TowerTalk] Ameritron RCS-4 Info, Tom-W3FRG, 20:18
[TowerTalk] HAM Series Rotor ID Question, Tom-W3FRG, 19:24
Re: [TowerTalk] T2X Tail Twister rotator freezes in place below 32 degrees ?, Roger (K8RI) on TT, 18:26
Re: [TowerTalk] HAM Series Rotor ID Question, Joe Subich, W4TV, 16:35
Re: [TowerTalk] T2X Tail Twister rotator freezes, jcjacobsen@q.com, 15:34
Re: [TowerTalk] HAM Series Rotor ID Question, Mike Reublin NF4L, 15:03
[TowerTalk] HAM Series Rotor ID Question, Richard Solomon, 14:52
Re: [TowerTalk] T2X Tail Twister rotator freezes in place below 32 degrees ?, Mike Reublin NF4L, 14:45
Re: [TowerTalk] T2X Tail Twister rotator freezes in place below 32 degrees ?, Dick, 14:37
Re: [TowerTalk] overhead truss for 80M rotary dipole, Peter Voelpel, 14:00
[TowerTalk] T2X Tail Twister rotator freezes in place below 32 degrees ?, Gary Marks, 12:31
[TowerTalk] Ameritron RCS-4 Info, Chuck Sudds, 12:18
Re: [TowerTalk] overhead truss for 80M rotary dipole, Stan Stockton, 12:12
Re: [TowerTalk] How to run HFTA v1.04 under Windows 8.1?, John Kuklewicz N7ZN, 11:03
Re: [TowerTalk] FW: now a dating site?, David Gilbert, 07:42
Re: [TowerTalk] 80 meter dipole, David Robbins, 07:27
Re: [TowerTalk] BN-4000 Balun, Tom Nicholson, 06:53
[TowerTalk] Fwd: 80 meter dipole, Hans Hammarquist via TowerTalk, 06:48
Re: [TowerTalk] 80 meter dipole, Tom Osborne, 00:45
Re: [TowerTalk] 80 meter dipole, Wes Attaway \(N5WA\), 00:02

July 20, 2014

[TowerTalk] BN-4000 Balun, Dennis W0JX via TowerTalk, 23:46
[TowerTalk] TH-7DX Balun, Jim Thomson, 23:31
Re: [TowerTalk] FW: now a dating site?, David Gilbert, 23:29
Re: [TowerTalk] 80 meter dipole, David Gilbert, 23:25
Re: [TowerTalk] TH-7DX Balun, LB3RE LJ3RE Stein-Roar Brobakken, 23:14
Re: [TowerTalk] FW: now a dating site?, Tom Osborne, 22:46
Re: [TowerTalk] FW: now a dating site?, Alan NV8A, 22:43
Re: [TowerTalk] 80 meter dipole, Dan Hearn, 22:13
[TowerTalk] FW: now a dating site?, john nistico, 20:56
[TowerTalk] 80 meter dipole, Tom Osborne, 20:36
[TowerTalk] TH-7DX Balun, Byron Tatum, 18:02
Re: [TowerTalk] How to run HFTA v1.04 under Windows 8.1?, TexasRF--- via TowerTalk, 08:00
Re: [TowerTalk] Transmission Line calculator, Steve Hunt, 04:14
Re: [TowerTalk] Transmission Line calculator, Jim Brown, 03:10

July 19, 2014

[TowerTalk] Antenna to tower mounting bracket, john nistico, 21:09
Re: [TowerTalk] Transmission Line calculator, Bill Aycock, 20:43
Re: [TowerTalk] Transmission Line calculator, Dave Hachadorian, 20:16
[TowerTalk] Transmission Line calculator, Bill Aycock, 20:09
Re: [TowerTalk] overhead truss for 80M rotary dipole, Peter Voelpel, 16:09
Re: [TowerTalk] overhead truss for 80M rotary dipole, Grant Saviers, 15:10
[TowerTalk] overhead truss for 80M rotary dipole, Jim Thomson, 08:50
[TowerTalk] MARC on a 64 bit OS, Jim Thomson, 06:23

July 18, 2014

[TowerTalk] TH-7DX Revised Dimensions for 10 Meters, Byron Tatum, 22:37
Re: [TowerTalk] Wooden Gin Pole?, Roger (K8RI) on TT, 19:16
Re: [TowerTalk] TowerTalk Digest, Vol 139, Issue 25, Roger (K8RI) on TT, 19:05
Re: [TowerTalk] TowerTalk Digest, Vol 139, Issue 25, Will Jones, 17:34
Re: [TowerTalk] Wooden Gin Pole?, Joe K2UF, 17:13
Re: [TowerTalk] How to run HFTA v1.04 under Windows 8.1?, John Langdon, 17:03
Re: [TowerTalk] How to run HFTA v1.04 under Windows 8.1?, Joe Subich, W4TV, 16:14
Re: [TowerTalk] Wooden Gin Pole?, john@kk9a.com, 15:51
Re: [TowerTalk] How to run HFTA v1.04 under Windows 8.1?, Pete Smith N4ZR, 15:43
Re: [TowerTalk] How to run HFTA v1.04 under Windows 8.1?, Jim Brown, 14:37
[TowerTalk] How to run HFTA v1.04 under Windows 8.1?, William Hein, 14:25
Re: [TowerTalk] Wooden Gin Pole?, Dan Cisson, 13:26
Re: [TowerTalk] MARC on a 64 bit OS, Dave Hachadorian, 11:04
Re: [TowerTalk] MARC on a 64 bit OS, john@kk9a.com, 09:40
[TowerTalk] Installing 18HT "Hy-Tower" soon, Allen R. Brier, 09:36
[TowerTalk] MARC on a 64 bit OS, mike stokes, 08:35

July 17, 2014

Re: [TowerTalk] sitepro1, Steve Maki, 23:05
Re: [TowerTalk] sitepro1, Mike Lyon, 20:03
[TowerTalk] sitepro1, Linux Mercedes, 19:08
[TowerTalk] Wooden Gin Pole?, Linux Mercedes, 17:57
Re: [TowerTalk] NO EMAILS FROM TT PAST WEEK, Charlie Gallo, 15:08
[TowerTalk] NO EMAILS FROM TT PAST WEEK, k7gjx, 13:15

July 14, 2014

Re: [TowerTalk] Cores, larryjspammenot@teleport.com, 16:07
[TowerTalk] [OT][OT] Old Coax, Michael Poteet, 15:49

July 13, 2014

Re: [TowerTalk] Cores, Roger (K8RI) on TT, 14:42
Re: [TowerTalk] what type ferite core are you useing part number, Jim Brown, 13:23
[TowerTalk] what type ferite core are you useing part number, Kevin Adam, 12:59
Re: [TowerTalk] Cores, Jim Brown, 06:19

July 12, 2014

Re: [TowerTalk] Cores, Roger (K8RI) on TT, 17:48
[TowerTalk] Subject: How do bldg inspectors handle screw in earth anchors?, Earl Morse, 09:13

July 11, 2014

[TowerTalk] Antenna Mart Remote Antenna Switch, Keith Neighbors, 18:06
Re: [TowerTalk] TowerTalk Digest, Vol 139, Issue 18, Drax Felton, 16:47
Re: [TowerTalk] TowerTalk Digest, Vol 139, Issue 18, Alfred Watson via TowerTalk, 15:51
[TowerTalk] Antenna Mart Switch, Keith Neighbors, 15:51
Re: [TowerTalk] Cores, N1MM, 15:51
Re: [TowerTalk] US Tower on trailer, Jim Lux, 13:45
Re: [TowerTalk] US Tower on trailer, larryjspammenot@teleport.com, 13:04
Re: [TowerTalk] Antenna Mart Remote Antenna Switch, Gene Smar, 11:02
Re: [TowerTalk] Antenna Mart Remote Antenna Switch, Joe Subich, W4TV, 10:01
Re: [TowerTalk] Antenna Mart Remote Antenna Switch, Big Don, 09:53
[TowerTalk] Antenna Mart Remote Antenna Switch, Keith Neighbors, 09:03
Re: [TowerTalk] How do bldg inspectors handle screw in earth anchors?, Brian Amos, 03:39

July 10, 2014

Re: [TowerTalk] How do bldg inspectors handle screw in earth anchors?, Mickey Baker, 20:38
Re: [TowerTalk] How do bldg inspectors handle screw in earth anchors?, Richard (Rick) Karlquist, 20:38
Re: [TowerTalk] overhead truss for 80M rotary dipole, Chuck Gerarden, 19:33
Re: [TowerTalk] How do bldg inspectors handle screw in earth anchors?, Brian Amos, 18:25
Re: [TowerTalk] How do bldg inspectors handle screw in earth anchors?, Jim Lux, 16:21
[TowerTalk] How do bldg inspectors handle screw in earth anchors?, Richard (Rick) Karlquist, 13:29
Re: [TowerTalk] overhead truss for 80M rotary dipole, john@kk9a.com, 06:55
Re: [TowerTalk] overhead truss for 80M rotary dipole, Markku Oksanen, 03:01
Re: [TowerTalk] overhead truss for 80M rotary dipole, Grant Saviers, 01:36

July 09, 2014

Re: [TowerTalk] overhead truss for 80M rotary dipole, john, 21:39
[TowerTalk] overhead truss for 80M rotary dipole, Chuck Gerarden, 20:50
Re: [TowerTalk] Mixing Rohn 20G and 25G, Linux Mercedes, 10:48
Re: [TowerTalk] Mixing Rohn 20G and 25G, Scott Reed, 07:59

July 08, 2014

Re: [TowerTalk] Cores, Bill Turner, 22:10
Re: [TowerTalk] Cores, Steve Hunt, 16:08
[TowerTalk] Connector prep tool for Commscope FXL-1480 1 1/4", Tim Wininger, 16:06
Re: [TowerTalk] Cores, Jim Brown, 16:04
Re: [TowerTalk] Cores, James Chaggaris, 15:58
Re: [TowerTalk] Cores, Jim Brown, 15:55
[TowerTalk] TEST, Richard W. Ehrhorn, 15:04
Re: [TowerTalk] US Tower on trailer, James Chaggaris, 14:48
[TowerTalk] US Tower on trailer, Doug Ronald, 14:42
Re: [TowerTalk] Cores, Steve Hunt, 14:05
Re: [TowerTalk] Cores, larryjspammenot@teleport.com, 13:46
[TowerTalk] Big Bertha Tower For Sale, Will Jones, 12:21

July 07, 2014

Re: [TowerTalk] Hy-Gain Calibration Pot/Switch, Gedas, 13:57
Re: [TowerTalk] Hy-Gain Calibration Pot/Switch, W2RU - Bud Hippisley, 13:42
Re: [TowerTalk] Hy-Gain Calibration Pot/Switch, W2RU - Bud Hippisley, 13:32
Re: [TowerTalk] AB-252, AB-253, AB-254, AB-255, AB-256, AB-257 aluminum military masts info wanted, Doug Ronald, 13:23
Re: [TowerTalk] Hy-Gain Calibration Pot/Switch, Gedas, 12:50
Re: [TowerTalk] Hy-Gain Calibration Pot/Switch, n8de, 12:46
[TowerTalk] Hy-Gain Calibration Pot/Switch, Gedas, 12:38

July 06, 2014

[TowerTalk] AB-252, AB-253, AB-254, AB-255, AB-256, AB-257 aluminum military masts info wanted, Richard (Rick) Karlquist, 22:46
Re: [TowerTalk] HyGain HG-70HD and Layover Fixture, Grant Saviers, 20:31
[TowerTalk] HyGain HG-70HD and Layover Fixture, Don , 17:40
[TowerTalk] Announcing the passing of Thomas L Anderson Jr. (Tom Anderson WW5L), Tom Anderson, 09:52

July 04, 2014

Re: [TowerTalk] Over heated cores, Jack Brindle, 17:03
Re: [TowerTalk] Cores, Jim Brown, 13:00
[TowerTalk] Cores, Dan Hearn, 11:46
[TowerTalk] 2.4 OD x1.4 ID type 31 cores, Dan Hearn, 11:41
Re: [TowerTalk] : ??????????? ???, K7LXC--- via TowerTalk, 11:11
Re: [TowerTalk] Advice Wanted-Tuning A 10 Meter Telrex Beam, Jim Thomson, 07:14

July 03, 2014

Re: [TowerTalk] Over heated cores, Roger (K8RI) on TT, 22:58
Re: [TowerTalk] : ??????????? ???, Roger (K8RI) on TT, 22:53
Re: [TowerTalk] : ??????????? ???, Richard Solomon, 21:33
Re: [TowerTalk] : ??????????? ???, john, 21:24
Re: [TowerTalk] Over heated cores, larryjspammenot@teleport.com, 18:07
[TowerTalk] Tower Work, Chuck Sudds, 17:03
[TowerTalk] Big Ten Tec Sale, Jim Brown, 16:57
Re: [TowerTalk] : ??????????? ???, K7LXC--- via TowerTalk, 16:49
Re: [TowerTalk] Mixing Rohn 20G and 25G, Roger (K8RI) on TT, 15:56
Re: [TowerTalk] Advice Wanted-Tuning A 10 Meter Telrex Beam, Jim Brown, 15:39
Re: [TowerTalk] : è?ªå?¨å??å¤?ï¼?Re: [TowerTal k] Advice Wanted-Tuning A, john@kk9a.com, 15:06
Re: [TowerTalk] Mixing Rohn 20G and 25G, TexasRF--- via TowerTalk, 14:46
Re: [TowerTalk] Mixing Rohn 20G and 25G, Michael Clarson, 13:40
Re: [TowerTalk] : è‡ªåŠ¨å›žå¤ ï¼šRe: [TowerTal k] Advice Wanted-Tuning A 10 Meter Telrex Beam, Bill Fikis, 13:38
Re: [TowerTalk] : è‡ªåŠ¨å›žå¤ ï¼šRe: [TowerTal k] Advice Wanted-Tuning A 10 Meter Telrex Beam, Richard Solomon, 13:35
Re: [TowerTalk] Mixing Rohn 20G and 25G, Linux Mercedes, 13:29
Re: [TowerTalk] Advice Wanted-Tuning A 10 Meter Telrex Beam, Wes Attaway \(N5WA\), 13:10
Re: [TowerTalk] : è‡ªåŠ¨å›žå¤ï¼šRe: [TowerTal k] Advice Wanted-Tuning A 10 Meter Telrex Beam, Mike Reublin NF4L, 13:07
Re: [TowerTalk] : è‡ªåŠ¨å›žå¤ï¼šRe: [TowerTal k] Advice Wanted-Tuning A 10 Meter Telrex Beam, Hector Garcia,XE2K, 12:20
[TowerTalk] : è?ªå?¨å??å¤?ï¼?Re: [TowerTal k] Advice Wanted-Tuning A 10 Meter Telrex Beam, john@kk9a.com, 12:19
Re: [TowerTalk] Advice Wanted-Tuning A 10 Meter Telrex Beam, john@kk9a.com, 12:16
Re: [TowerTalk] Advice Wanted-Tuning A 10 Meter Telrex Beam, David Jordan, 10:49
Re: [TowerTalk] Advice Wanted-Tuning A 10 Meter Telrex Beam, TexasRF--- via TowerTalk, 10:32
Re: [TowerTalk] Advice Wanted-Tuning A 10 Meter Telrex Beam, Ray, W4BYG, 09:52

July 02, 2014

Re: [TowerTalk] Mixing Rohn 20G and 25G, Roger (K8RI) on TT, 23:27
Re: [TowerTalk] Mixing Rohn 20G and 25G, Linux Mercedes, 20:38
Re: [TowerTalk] FW: Over heated cores, Roger (K8RI) on TT, 19:46
Re: [TowerTalk] Mixing Rohn 20G and 25G, Kevin Kidd, 19:44
Re: [TowerTalk] Mixing Rohn 20G and 25G, Steve Maki, 18:15
Re: [TowerTalk] Advice Wanted-Tuning A 10 Meter Telrex Beam, Edward Sawyer, 11:58
Re: [TowerTalk] Advice Wanted-Tuning A 10 Meter Telrex Beam, john@kk9a.com, 11:21
Re: [TowerTalk] Advice Wanted-Tuning A 10 Meter Telrex Beam, John Lemay, 11:13
Re: [TowerTalk] Mixing Rohn 20G and 25G, Wayne Kline, 11:10
Re: [TowerTalk] Advice Wanted-Tuning A 10 Meter Telrex Beam, n8de, 10:51
Re: [TowerTalk] Mixing Rohn 20G and 25G, Wayne Kline, 10:43
[TowerTalk] Advice Wanted-Tuning A 10 Meter Telrex Beam, James Archer, 09:59
Re: [TowerTalk] Mixing Rohn 20G and 25G, Kevin Kidd, 09:23
[TowerTalk] FW: Over heated cores, Matt, 02:11
Re: [TowerTalk] Over heated cores, Roger (K8RI) on TT, 00:55

July 01, 2014

[TowerTalk] Rohn 20G and 25G Sections, Joseph Crawford, 23:53
Re: [TowerTalk] Mixing Rohn 20G and 25G, Wayne Kline, 23:32
Re: [TowerTalk] Mixing Rohn 20G and 25G, Paul Christensen, 22:14
Re: [TowerTalk] Mixing Rohn 20G and 25G, Linux Mercedes, 21:30
Re: [TowerTalk] Mixing Rohn 20G and 25G, Linux Mercedes, 21:24
Re: [TowerTalk] Mixing Rohn 20G and 25G, Steve Maki, 21:03
[TowerTalk] Over heated cores, Roger (K8RI) on TT, 20:25
Re: [TowerTalk] Mixing Rohn 20G and 25G, Roger (K8RI) on TT, 20:03
Re: [TowerTalk] Mixing Rohn 20G and 25G, Wayne Kline, 11:00
Re: [TowerTalk] Mixing Rohn 20G and 25G, Kevin Kidd, 08:42