Towertalk
[Top] [All Lists]

Re: [TowerTalk] KT36 Balun

To: towertalk@contesting.com
Subject: Re: [TowerTalk] KT36 Balun
From: k3mm@verizon.net
Date: Mon, 28 Apr 2014 09:34:42 -0500 (CDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
 I've never had a tubular KLM 4:1 balun from my KT34xa's go bad and mine are 
20+ years old.  Obviously not an unreliable implementation, although the plated 
mounting clip used to rust out!  Dont know what the M2 version looks like...

I'm not a big fan of the packaging of those I see on the balundesign website.  
Since the design is significantly different, I'd be curious if it changed the 
tuning/match on a KT34/6 and how best to mount the box on the boom.

Ty K3MM
 

On 04/28/14, caraj@cox.net wrote:

Jim:
I use 6 baluns in my antennas. Most have been changed over from white
platsic pipe contained baluns(which often go bad in 1 year) to Balun Design 
produced
 - http://www.balundesigns.com - models. They've worked fine for 18 months.
They are all current baluns. Can't remember the rationale . Asked this question 
a
long, long time ago. Call and talk to Balun design he is very helpful. You 
probably want
his model #4125 which is a 4:1 5kw.
73,
John K2SFS

---- Marsh Stewart <marsh@ka5m.net> wrote: 

=============
I'm rebuilding a KT34XA and installing the KT36 upgrade kit plus new style
boom to element clamps. Right now I plan to use the new 3KW balun I got from
M2. Is there something better out there I should consider? I believe Balun
Designs makes excellent high quality products that work.

Marsh, KA5M


Jim:

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Jim
W7RY
Sent: Saturday, April 26, 2014 11:00 PM
To: Jim W7RY; towertalk@contesting.com
Subject: Re: [TowerTalk] KT36 Balun

The KT-36 is 200 ohms feed point impedance. Not 50 ohms. I though I better 
clarify.

73

Jim W7RY


-----Original Message----- 
From: Jim W7RY
Sent: Saturday, April 26, 2014 7:43 PM
To: towertalk@contesting.com
Subject: [TowerTalk] KT36 Balun

Which balun do you recommend for the M2 KT36? A voltage balun or a current 
balun? I run 1500 watts during RTTY contests.

I'm planning on winding my own. I have Jerry Sevick's book on building them.

Thanks!
73
Jim W7RY
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>