Fred,
If you had 0.3dB loss in a connector I doubt you or the guy at the other
end would hear the difference. But if you ran 1.5kW through it you'd
probably smell the difference!
100w is a lot of power to dissipate in such a small volume!
73,
Steve G3TXQ
On 16/01/2012 13:10, Frederick Vobbe wrote:
> You know, there is another component to this discussion. Let's suppose
> you have .1 to .5dB loss in an RF system. During transmission or
> reception, will that really mean anything? I'm not sure I would "hear"
> that, or see that on an "S" meter. The transfer of power in RF systems
> can be a complicated science, and yes, ever connector and cable add
> up. Personally, I would worry more about line loss, and antenna
> efficiency, than .3dB in a connector.
>
>
> Fred/W8HDU
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|