Dan,
How about two parallel dipoles from the same feedpoint with the 80m
dipole strung between the 90' supports and about 20' at each end
hanging down. The 40m dipole could then be 'fanned' downward from the
feedpoint and tied to the same end support as the 80m dipole.
-------------------()-----------------
| |
| ^ | this would be the 80m dipole.
| ^ |
| ^ |
x 40m dipole attached x
at this same feedpoint with
ends drooping down towards points
marked 'x' where both dipoles are tied off.
Don
N8DE
Quoting Dan <n5ar@air-pipe.com>:
> I would like to build and send to my son a coil loaded dipole for
> 80/40m. He has about 90 feet space to hang it in. Has anyone information
> on loading coil values and placement in the 90 ft dipole?
>
> Tnx, Dan, N5AR
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|