Hi Steve,
I got 15 plates with the AB-105 hardware. I'll only need 6 of them for
the 2 towers I'm putting up. Since I have them and they are rusty, I'm going
to enlarge the holes before I get them hot dipped.
If you know someone who needs some AB-105 hardware, I'll have some nice
galvanized plates left over.
Guy
> From: K7LXC@aol.com
> Date: Wed, 24 Mar 2010 13:44:13 -0400
> To: towertalk@contesting.com; guy_molinari@hotmail.com
> Subject: Re: [TowerTalk] Drill bits
>
>
> Here's my 2 cents worth. I'd use a small bit for a pilot hole and then use
> a step-drill (e.g. Unibit) to get it to the desired size. Those
> step-drills will enlarge it to a nearly perfect round hole in short order.
>
> What are you building that you need 140 holes for? Sounds kind of
> ambitious - hi.
>
> Cheers,
> Steve K7LXC
> TOWER TECH
>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/210850553/direct/01/
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|