Bill Aycock wrote:
> The owners manual says the bolts are 5/16-18, 1 5/8 long. The manual shows a
> diagram with some unthreaded length.
> Bill-W4BSG
>
It's the hole that needs to be threaded all the way through. Normally
the unthreaded portion of a bolt is smaller than the threaded portion.
> ----- Original Message -----
> From: "w4lde" <w4lde@numail.org>
> To: <wc1m73@gmail.com>; "Tower and HF antenna construction topics."
> <towertalk@contesting.com>
> Sent: Saturday, March 20, 2010 3:50 PM
> Subject: Re: [TowerTalk] Trouble mounting T-2X
>
>
>
>> Dick,
>>
>> Looks like the bolts are 1 1/2" long and either a 1/4" or 3/16" and my
>> guess is a 3/16" I believe its 20 threads per inch. There is no
>> markings on the bolt
No lines on the head, like one to each flat or so? Then it's a low
grade, which is fine in this case.
>> and a standard 1/2" socket fits a little loose and
>> not a snug as I expected, so I wonder if its metric? Probably made in
>> China.
>>
Unless they've changed recently the bolts should still be 5/16-18 unless
some one accidentally slipped in the wrong bolts. More than once I've
picked up bolts at the big box stores and found a few "odd" ones in
there. IE...sorted by customer.
73
Roger (K8RI)
>> 73 de
>> Ron W4LDE
>>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|