Towertalk
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [TowerTalk] Amphenol PL259

from [Richards] [Permanent Link][Original]
To: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
Subject: Re: [TowerTalk] Amphenol PL259
From: Richards <jruing@ameritech.net>
Date: Tue, 28 Oct 2008 18:36:58 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com> 
Did you have to buy a special crimp tool?    Was it costly?

=================== K8JHR  =====================

Roger (K8RI) wrote:

I went to crimp connectors.  I solder the center pin, but
> the rest is crimp.  Fast and secure with no heat problems.
> 
================================================
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [TowerTalk] HAM IV vs. Tailtwister, D. Calder
Next by Date:  Re: [TowerTalk] Comtek PVS-2 80m Box with malfunction, LA6FJA/K3RAG Stein Roar Brobakken
Previous by Thread:  Re: [TowerTalk] Amphenol PL259, Roger (K8RI)
Next by Thread:  Re: [TowerTalk] Amphenol PL259, Bill MacLane
Indexes:  [Date] [Thread] [Top] [All Lists]