I went to Lowes already and got hacksaw, miter box and reamer.
I think it gonna be enough for beginners like me.
Thanks everybody.
Alex K2BB
2007/12/9, Roger (K8RI) <K8RI-on-TowerTalk@tm.net>:
>
>
>
>
> >
> > On Dec 7, 2007, at 10:17 PM, Dan Hearn wrote:
> >
> >> As a plumbers son who used a pipe cutter many times as a kid, I can
> >> tell you
> >> that they cause a significant reduction in OD and ID at the cut off
> >> point
> >> which is not easy to remove. The pipe cutter was used with a tapered
> >> pipe
> >> reamer which reduced the internal burr, however the ID is smaller than
> >> before cut off. I believe if you are planning on telescoping .058 wall
> >> tubing, like the stuff we regularly use for antenna elements, you
> >> would be
> >> better off using a hack saw and a file to do the job.
> >
> > I've cut plenty of .058 wall Al tubing that was telescoped inside or
> > outside other tubing. Make sure the cutter is sharp. Any burr that you
> > have can be easily removed with a deburring tool, or with some quick
> > work with a sanding sponge or sandpaper.
>
> and go gently. Most people I see using tubing cutters apply too much
> pressure, or try to cut too deeply
>
> >
> > Likely different with steel tubing that leaves a harder burr.
>
> I prefer the machinist's deburing tool, but a fine rat tail file works
> great. I'm talking about the size and type for sharpening chain saw
> chains.
>
> Emery cloth is fine but be careful using sand paper. Sand paper sheds sand
> and you don't want that embeded into the end of the tube or rolling around
> loose in there.
>
> Roger (K8RI)
>
> >
> > Bill Coleman, AA4LR, PP-ASEL Mail: aa4lr@arrl.net
> > Quote: "Not within a thousand years will man ever fly!"
> > -- Wilbur Wright, 1901
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|