Geez... when I was in 7th grade shop, we used a tool to dress the wheels on the
grinders. That and attaching a grounding strap to your arm when you're
polishing plastic on a buffing wheel are the only two things I remember about
"shop". Oh, yeah, I remember watching the girls gym class in the summer,
looking out the window too. :-)
73 de Bob - KØRC in MN
----- ORIGINAL THREAD -----
Message: 1
Date: Sat, 8 Dec 2007 09:59:29 -0500
From: Jeff Goldman <k3dua@erols.com>
Subject: Re: [TowerTalk] Pipe Cutters
To: TowerTalk <TowerTalk@contesting.com>
Message-ID: <9ec238878426d6e04604337b9f41b3dc@erols.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed
Aluminum is soft and what happens, over time, is that the small bits of
aluminum build up in the open pores of the abrasive wheel and the
forces involved will sometimes cause the wheel to crack and come apart
- - and pieces of the wheel can go flying in many directions and you
could be injured. Definitely a no-no. If you want to use a power saw,
use a carbide tipped regular wood type blade, not the abrasive wheels
that are for steel ONLY.
Jeff, K3DUA
On Dec 8, 2007, at 9:44 AM, Bill Turner wrote:
> ORIGINAL MESSAGE:
>
> On Fri, 07 Dec 2007 23:32:32 -0800, "Richard (Rick) Karlquist"
> <richard@karlquist.com> wrote:
>
>> Are you talking about an abrasive type blade?
>> Those are only for steel, not aluminum.
>>
>> Rick N6RK
>
> ------------ REPLY FOLLOWS ------------
>
> Really? I have used an abrasive blade on my table saw to cut aluminum
> for years with no problem, but that does not mean it is the best
> choice. Please tell me why it is not recommended and what would be the
> best blade.
>
> Thanks,
>
> 73, Bill W6WRT
> _______________________________________________
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|