In a message dated 10/26/2006 7:18:08 P.M. Pacific Daylight Time,
towertalk-request@contesting.com writes:
> Use 1/4 inch SS cable and you will have no trouble in the future...
Umm, only if the existing cable is 1/4". You can't put bigger cables on a
crank-up because the pulleys will only take the original size. I suspect the
LM354 uses 3/16" cable.
Different cables of the same OD will be close enough so if you want to
use SS, I don't know of any reason why not. The original cable is probably
7x19 stranded so you'd want to get the same in SS.
Cheers,
Steve K7LXC
TOWER TECH -
Professional tower services for hams
Cell: 206-890-4188
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|