>
>>But, what is the best way to make
>>sure that each post is 90 Degrees ?
>>
>>Rope it with guys till the concrete cures ?
>
> ------------ REPLY FOLLOWS ------------
>
> Guys are the way to go but I'd use something more rigid like wood 2x2s
> or similar. You don't want your guys to stretch in the wind, even a
> little bit.
How about both?
http://www.rogerhalstead.com/ham_files/tower13.htm
This is how I set the bottom two sections for my 45-G
The wood frame supports the sections to keep them from sinking through the
crushed rock at the bottom of the hole as well as helping to keep them
straight. Then I used 3/16" galvanized wire rope as guy wires to keep the
sections plumb.
Roger Halstead (K8RI and ARRL 40 year Life Member)
N833R - World's oldest Debonair CD-2
www.rogerhalstead.com
>
> Bill, W6WRT
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|