Towertalk
[Top] [All Lists]

Re: [TowerTalk] "Wire"less antenna connection

To: "reflector -tower" <towertalk@contesting.com>
Subject: Re: [TowerTalk] "Wire"less antenna connection
From: "Gary \"Joe\" Mayfield" <gary_mayfield@hotmail.com>
Date: Fri, 21 Jan 2005 21:09:42 -0600
List-post: <mailto:towertalk@contesting.com>
Icom made some radios that used a fiber link back in the 1980s.  The IC-900
and IC-901 I believe the only HF modules were for 10 meters.  It was a cool
concept, way ahead of it's time.

73,
Joe

----- Original Message ----- 
From: "Jim Lux" <jimlux@earthlink.net>
To: "David Robbins K1TTT" <k1ttt@arrl.net>; "reflector -tower"
<towertalk@contesting.com>
Sent: Friday, January 21, 2005 2:02 PM
Subject: RE: [TowerTalk] "Wire"less antenna connection


> At 07:47 AM 1/21/2005, David Robbins K1TTT wrote:
> >No lightning threat from supplying AC power???  How about just parking a
> >fuelcell or generator at the tower.
>
>
> Minimal lightning threat for the operators, anyway... The generator's
going
> to take a hit.
>
> Hey.. you could sit at home in the comfort of your living room and shoot
> the stuff over the internet. (except that FD requires the control op to be
> in the 1000 foot circle).
>
>
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>