Re: [TowerTalk] Station Ground

["K8RI on Tower Talk" <k8ri-tower@charter.net>]

One thing about that third "green wire I keep hearing about".

Only one piece of modern radio gear has that thrid green wire.  On all the 
other pieces the green wire goes only to the power supply and the power 
supply is seperated from the rig by at least 6 feet of cable.  If I have two 
rigs on the same PS they are then seperated by 12 feet.  If I have rigs on 
two seperate supplies they are seperated by the length of the DC line *plus 
the length of both AC cords and the DC line  to the other rig. Easily 20 
feet.  These are lengths that can easily develop problems.  With all of the 
rigs on the same circuits and tied togehter through short leads to a buss 
I'd think we'd be eliminating ground loops.

The only case of RF feed back I ever had was when I decided to "neaten up" 
the mess behind my desk at a previous QTH.  It took me two weeks to get it 
all working again.

One thing I do have if AC pickup in the one mike cord.  changing the shield 
to work as a shield fixed that, but Icom uses the shield as part of a 
control circuit.


Roger Halstead (K8RI, EN73 & ARRL Life Member)
N833R, World's Oldest Debonair (S# CD-2)
www.rogerhalstead.com 


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk