Very interesting Roland. I have a few questions.
Where did the dirt go?
How much did it cost?
What were the specs for hole for the tower you installed and how close are
they to what was drilled?
What is that machine called?
Looks like a great idea to me.
Julio, W4HY
----- Original Message -----
From: "Roland J. Guidry" <rguidry@na5q.us>
To: <towertalk@contesting.com>
Sent: Thursday, July 22, 2004 9:30 PM
Subject: [TowerTalk] Hole digging question
> This is what i did when specs called for a 4 ft. hole 8 ft deep. Cheaper
than a backhoe and save $$$ on concrete. Check out pics at
http://www.na5q.us/na5q/tower_installation.htm
>
> Roland
>
>
> Date: Thu, 22 Jul 2004 10:26:52 -0400
> From: "Pat Chiles" <chilesp@adelphia.net>
> Subject: [TowerTalk] Hole Digging Question
> To: <towertalk@contesting.com>
> Message-ID: <009201c46ff7$eec04600$0200a8c0@PATXP>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I will be starting a tower project in about a month. It will be a 72 FT
crank-up and the specs call for a foundation that is 5ftx5ftx8ft. Is it
reasonable to expect a back-hoe operator to be able to dig this size hole
without elongating it beyond 5ftx5ft?
>
> Pat, K8PC
>
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|