To: | "Richard Karlquist" <richard@karlquist.com>,"David Jordan" <wa3gin@erols.com> |
---|---|
Subject: | linear loading vs lumped RE: [TowerTalk] SteppIR 40/30 |
From: | Jim Lux <jimlux@earthlink.net> |
Date: | Wed, 05 Nov 2003 09:54:21 -0800 |
List-post: | <mailto:towertalk@contesting.com> |
At 07:11 AM 11/5/2003 -0800, Richard Karlquist wrote:
> Folding the element does little to reduce the performance. It looks > hokie, but it's simple, light weight, more efficient than lumped > inductance. The wires have to clear whats underneath but it's a > > wa3gin I am properly cynical of manufacturer's claims, but I'd be interested in some analysis of why linear loading would be better or worse than lumped. It's an interesting question. With linear loading, there are currents in both the element and the loading, and perhaps they are higher, for more IR losses. There's also potentially a change in the current distribution on the element which would not only change the pattern, but would also change the IR losses. Intuitively, I would believe that one could build a lower loss coil than a linear inductor of the same inductance (because you need fewer feet of wire in the coil to get a given inductance, because you have the turns squared effect) Given the remarkably low losses with decent lumped loading, even if the linear loading were 10 times greater, it would still probably be insigificant compared to the other losses in the entire radiating system (except for the few with those hilltop saltwater marshes..) _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA. _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [TowerTalk] SteppIR 40/30 and loading, K3BU |
---|---|
Next by Date: | Re: [TowerTalk] Re: linear loading, K3BU |
Previous by Thread: | Re: [TowerTalk] Re: 40m beam with wires dangling down, kiski.net |
Next by Thread: | Re: [TowerTalk] SteppIR 40/30, K3BU |
Indexes: | [Date] [Thread] [Top] [All Lists] |