Jim et all,
thanks for the speedy responses. That was my other question, however you
answered it. Was wondering which pair the #16 (heavier) guage wires went to.
Your saying 1, and 2 both ends?
Have a great weekend!
Kirb, VE6IV
-----Original Message-----
From: Jim Rhodes [mailto:k0xu@iowadsl.net]
Sent: Thursday, July 31, 2003 11:26 PM
To: knesbitt@nucleus.com
Subject: Re: [TowerTalk] Rotor Wiring Sequence Help
There is no hard & fast sequence, as long as they are the same. What I do
is to connect them in alphabetical order. The 2 large wires go first. Black
to 1 & red or white to 2. then start with blue to 3 and progress on down the
line with the rest. This way you never have to look for another color chart
again.
At 11:25 PM 7/31/03, you wrote:
Hi all,
I have an old CDE TR-44 rotator that I am planning on putting up this
summer. Unfort. I have misplaced the "stone tablet" data sheet showing
the
wiring interconnect.
It is an 8 wire unit and was hoping someone might be able to tell me
what
the correct wiring sequence is between the control head and the rotor
unit
itself.
Thanks very much!
Kirb, VE6IV
Calgary, AB
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
To: <towertalk@contesting.com>
Version: 6.0.504 / Virus Database: 302 - Release Date: 7/24/2003
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
Jim Rhodes K0XU
jim@rhodesend.net
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
To: <towertalk@contesting.com>
Version: 6.0.504 / Virus Database: 302 - Release Date: 7/24/2003
|