Towertalk
[Top] [All Lists]

[TowerTalk] Ham IV rotor control box

To: <towertalk@contesting.com>
Subject: [TowerTalk] Ham IV rotor control box
From: n3rr@erols.com (Bill Hider (N3RR))
Date: Wed, 28 Nov 2001 15:27:48 -0500

My Ham IV manual, page 20, says that the resistance across terminals 1 and 2
should read .4 Ohms.
I see no place where resistance should be 4 Ohms.
My HAM IV manual is dated 1 Aug 84 and is PN 801935-1, S/N 84348

Bill, N3RR

-----Original Message-----
From: owner-towertalk@contesting.com
[mailto:owner-towertalk@contesting.com]On Behalf Of David O Hachadorian
Sent: Wednesday, November 28, 2001 6:06 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Ham IV rotor control box



My Tailtwister manual says .4 ohm. I think your manual
has a typo.

Dave Hachadorian, K6LL
Yuma, AZ
K6LL@juno.com


On Wed, 28 Nov 2001 10:19:55 -0500 "Dan Evans" <n9rla@yahoo.com> writes:
>
> Hi Folks,
>
> A local friend brought over a Ham IV control box this past weekend.
> He told
> me it quit working, and wanted me to check it out for him.  I've
> never owned
> a Ham IV, but luckily he brought the manual over with it.  I ran
> through the
> test procedures outlined in the manual and everything seemed OK
> except for
> one part.  The manual says checking resistance across terminals 1
> and 2 [and
> several others] should read 4 ohms.  My meter shows this as .4 ohms.
>  Now I
> don't have any reason to doubt the accuracy of my meter, but this
> isn't much
> resistance.  Does this sound like a problem?  Is this an indication
> of any
> common failures?
>
> All of the voltage checks the manual called for were correct.
>
> Thanks for the help,
> Dan
>
>
> Dan Evans N9RLA
> Scottsburg, IN 47170
> {EM78}
> IN-Ham list administrator
> QRP-l #1269
> 1/2 of the N9RLA /R no budget Rover Team
> Check out the Rover Resource Page at:
> http://www.qsl.net/n9rla
>
>
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
>
> List Sponsored by AN Wireless:  AN Wireless handles Rohn tower
> systems,
> Trylon Titan towers, coax, hardline and more. Also check out our
> self
> supporting towers up to 100 feet for under $1500!!
> http://www.anwireless.com
>
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
>

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!
http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com



List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>