> Try broken ground wire in the circuit because you could get false
> readings thru the coax return unhook feed coax and check ohm's on the
> wires if you have to much resistance there's your problem to small a
> wire for the distance.
In almost any installation the wire gauge is limited by mechanical
worries, and not conductor size.
2500 feet of number 20 copper is still good as long as it isn't
broken someplace along the way.
73, Tom W8JI
W8JI@contesting.com
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|